JetBootsUpdated 6 days ago
Shop JetBoots
Fully wireless compression boots
Key Product Features
- Fully wireless with integrated internal pumps
- Integrated, one-touch control panel
- Proprietary TruGrade Technology™ for safest, precise application of pressure
- Proprietary FastFlush Technology™ for full inflation and deflation in 60 secs
- 4 time intervals (20 min, 40 min, 60 min, and continuous)
- 4 pressure settings (25, 50, 75, 100 mmHg)
- 240-minute battery life
- Easy-to-clean, hygienic design
What's included in box?
- 2 compression boots with integrated pumps
- 36W charger - jack port
- Splitter charging cord
- Boots pouch
Using Your Device
Putting On Your Device
- It is recommended that you wear shorts or thin pants while using the device. Reach a comfortable position, either sitting upright or lying down with your legs straight and feet in line with your waist.
- Unzip the compression boots completely and place each leg and foot inside each boot. Your legs should be in the center of each boot with your feet as close to the bottom as possible.
- Keep your legs straight and flat to prevent kinks and folds. Only hold the boots’ edges when handling them. Avoid holding the device by the control panel. Zip both boots up.
DO NOT use the device while standing or walking.
Begin Your Treatment
- After turning on and pairing your RecoveryAir JetBoots, you are ready to choose your program settings.
- Access two preset program options when connected to the Therabody app: Recover and Warm-up.
- Once you have chosen your desired program, use the Pressure button to adjust the pressure setting.
- Then, toggle through the time options using the Time button, to set your desired treatment time (20min, 40min, 60min, or continuous).
- Once you have selected the treatment options that are right for you, press start, relax, and you’ll be on your way to recovery in no time.
Charging and LED Indicator Guide
- You can use your JetBoots while they are charging. Also, you can charge one of the boots at the time directly with the power adapter.
- After turning off the integrated pump, locate the power charging port found at the front right side of the foot of the boot.
- Connect one side of the splitter to the charging port.
- Do the same for the second boot.
- Connect the other end (female end) of the splitter to the power adapter and connect the other side to a wall power outlet.
- Charging is complete when all 3 LED lights of the LED battery indicator are lit.
Care and Cleaning
This product is NOT waterproof. Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with corrosive solutions, which can damage the device’s appearance and function.
It’s important to take proper care of your RecoveryAir JetBoots compression boots because the longer they last, the longer you will feel the benefits. Each boot has non-porous medical grade material that helps fight bacteria and provide a resistant surface. Our internal overlapping chambers provide a smooth surface to clean, this means no wiping under chamber flaps where bacteria can build up. This also means, no smells.
- Unzip the boots completely and lay them on a flat surface.
- Take a disinfectant wipe or spray, and gently clean the inside of the boots. Avoid any oil based cleaning product.
- Once you have cleaned your garment, make sure to fully dry the surface by hanging them up or wiping them down.
- We also recommend you wipe down the exterior of the pump to reduce surface contaminants. Avoid using sprays or soaking wet wipes on the back of the pump due to the air vents. Clean with caution.
Specifications
| Battery Life |
|
| Weight |
|
| Size |
|
Dimensions |
|
| Material |
|