Shop JetBoots PRO Plus. Wireless compression boots with infrared LED and vibration therapies. DO NOT use the device while standing or walking. Note: If using an alternative power adapter or splitter cable, ensure that it is from a trusted source and

<p id="isPasted">Shop <a href="https://www.therabody.eu/en-fr/products/jetboots-pro-plus-regular" target="_blank" rel="noopener noreferrer" class="fr-strong">JetBoots PRO Plus</a></p><p>Wireless compression boots with infrared LED and vibration therapies&#xA0;</p><h2 id="key-product-features">Key Product Features</h2><ul><li style="font-size: 18px;">3-in-1 therapies to maximize recovery</li><li style="font-size: 18px;">Fully wireless &#x2014; no external pumps or hoses to connect to</li><li style="font-size: 18px;">Scientifically-designed routines</li><li style="font-size: 18px;">Precise, safe treatments tailored to you</li><li style="font-size: 18px;">Inflates and deflates in as little as 60 seconds</li></ul><h2 id="whats-included-in-box">What&apos;s included in box?</h2><ul><li style="font-size: 16px;">JetBoots PRO Plus device (2 pneumatic compression boots with integrated pumps)</li><li style="font-size: 16px;">Power adapter</li><li style="font-size: 16px;">Splitter cable</li><li style="font-size: 16px;">Travel bag</li></ul><h2 id="using-your-device">Using Your Device</h2><h3 id="putting-on-your-device"><span style="font-size: 16px;">Putting On Your Device</span></h3><ul><li style="font-size: 16px;">It is recommended that you wear shorts while using the device to allow the device to contact your skin directly.&#xA0;</li><li style="font-size: 16px;">Reach a comfortable position, either sitting upright or lying down with your legs straight and feet elevated.&#xA0;</li><li style="font-size: 16px;">Unzip the boots completely and place each leg and foot inside each boot. Your legs should be in the center of each boot; keep them in between the infrared LED lights as a reference point. Your feet should be as close to the bottom console as possible.&#xA0;</li><li style="font-size: 16px;">Zip up the boots and keep them flat. Keep your legs straight and flat to prevent kinks and folds.&#xA0;</li><li style="font-size: 16px;">Only hold the boots&#x2019; edges when handling them. Avoid holding the device from the internal layer. Zip both boots up&#xA0;</li></ul><p>DO NOT use the device while standing or walking.&#xA0;</p><h3 id="begin-your-treatment"><span style="font-size: 16px;">Begin Your Treatment</span></h3><ul><li style="font-size: 16px;">Turn on the device. To turn on your device, press and hold the center button on the control panel of the lead boot. The LCD screen on the control panel will light up when the lead boot is on. Press and hold the button on the support boot to power it on. The button will illuminate when the support boot is powered on. Each boot will vibrate as it powers on. The boots will connect to each other via low power Bluetooth once they are both powered on.. Once connected, a two-boot and battery icon will display on the LCD screen.&#xA0;</li><li style="font-size: 16px;">Select your treatment. Toggle through several preset treatment options using the up and down buttons: Quick Start, Warm-up, Recovery, Lower Leg, Upper Leg, Knee, Joint Therapy, Pain Relief, and Sleep Prep. Press the center button on the control panel to select your desired treatment. The treatment will automatically start when a preset is selected. In Quick Start, you will be asked to select the pressure settings to start the treatment.&#xA0;</li><li style="font-size: 16px;">Pneumatic compression. Pressure options are offered in 5 mmHg increments from 20-100 mmHg in Quick Start mode. Toggle to your desired pressure settings and select by pressing the center button on the control panel. The pressure setting used in your last treatment will become the default setting for your next treatment only in Quick Start. You can also add or subtract pressure during your treatment if desired, but the pressure range may be limited depending on your selected preset treatment. The preset treatments have purpose-designed pressure settings for an optimal treatment experience.&#xA0;</li><li style="font-size: 16px;">Start, pause, and exit treatment. Start your treatment by either selecting a preset treatment or entering Quick Start mode and selecting a pressure setting. Pressing the center button at any point during your treatment will pause the treatment. Press the center button again to resume the treatment. To exit the treatment, first pause and toggle up to the left arrow icon and press the center button to select.&#xA0;</li><li style="font-size: 16px;">Treatment time. Each preset treatment has a purpose-designed treatment time for an optimal experience. You can modify the session time once the treatment has started by toggling to the time icon and using the up and down arrows. Treatment durations are offered in five-minute increments from 10-60 minutes or fixed depending on the preset. You can also add or subtract time during your treatment. Your last time setting will become your default setting in Quick Start.&#xA0;</li><li style="font-size: 16px;">Infrared LED light therapy. Toggle to the Infrared LED light therapy icon using the left and right buttons to add it to your treatment (though it is included in many preset treatments). You can turn off Infrared LED light therapy at any point during your selected treatment by toggling down to OFF. Infrared LED light therapy will automatically shut off after receiving the appropriate dosage (45 minutes maximum) during all treatments. The preset treatments have a purpose-designed recommended LED light therapy for an optimal experience.&#xA0;</li><li style="font-size: 16px;">Vibration therapy. You can add vibration therapy to Quick Start and preset treatments. Toggle to the vibration icon to add it to your treatment. To select your desired settings, toggle between the three vibration intensities: low, medium, and high, or turn it off if desired. The preset treatments have a purpose-designed recommended vibration therapy for an optimal experience.&#xA0;</li><li style="font-size: 16px;">Turn off the device. Press and hold the center button on the control panel to turn off the device. Turning off the lead boot will also turn off the support boot. The device will automatically shut off after 10 minutes of inactivity when the treatment is paused, or 3 minutes after the treatment is completed.&#xA0;</li></ul><h2 id="charging-and-led-indicator-guide">Charging and LED Indicator Guide</h2><ul><li style="font-size: 16px;">The battery status of both boots is displayed on the top right corner of the control panel on the lead boot.&#xA0;</li><li style="font-size: 16px;">Plug one end of the power adapter into a wall outlet and connect the other end to the splitter.&#xA0;</li><li style="font-size: 16px;">Connect both cables on the splitter to the charging port on each boot. Lift the rubber cover located on the right side of each foot to access the charging ports.</li><li style="font-size: 16px;">The device can be used while charging, but the battery level may not increase while the device is in use. Turn off the device to expedite the charging process.&#xA0;</li><li style="font-size: 16px;">The control panel will display the battery icons with a bolt to indicate that the lead and/or support boot are charging. Note that the support boot also indicates its battery status using the color of the center light: a. While not charging: &gt;30% battery (white) and &lt;30% battery (orange) b. While charging: &gt;90% battery (solid green if charging only, solid white if in use and charging) and &lt;90% battery (flashing orange) 6. Battery life of the device: a. Battery life on high use: 140 minutes b. Battery life on low use: 270 minutes&#xA0;</li></ul><p><span style="font-size: 16px;">Note: If using an alternative power adapter or splitter cable, ensure that it is from a trusted source and has not suffered any structural damage. Previous RecoveryAir model&#x2019;s power adapter and splitter are not compatible with the device.</span>&#xA0;</p><h2 id="care-and-cleaning">Care and Cleaning</h2><p>This product is NOT waterproof. Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with corrosive solutions, which can damage the device&#x2019;s appearance and function.&#xA0;</p><p>The device contains medical-grade material covering the internal chamber to help reduce the potential for microbial growth and moisture retention and limit the potential for bacterial transmission.&#xA0;</p><ul><li style="font-size: 16px;">Unzip the boots completely and lay them on a flat surface.&#xA0;</li><li style="font-size: 16px;">Use a 70% isopropyl alcohol (IPA) cleaning solution to gently clean the inside of the boots. Never use oil-based cleaning products. Avoid applying pressure when cleaning the internal surface of the boot.&#xA0;</li><li style="font-size: 16px;">Wipe down the device&#x2019;s exterior using a soft cloth that is free of debris to reduce surface contaminants.&#xA0;</li><li style="font-size: 16px;">Ensure there is no remaining debris after fully cleaning the device.&#xA0;</li><li style="font-size: 16px;">Once you have fully cleaned the device, fully pat dry the surface and hang to dry completely before continuing use.&#xA0;</li></ul><h2 id="specifications">Specifications</h2><table style="width: 100%;"><tbody><tr><td style="width: 41.0883%; text-align: left;">Battery Life</td><td style="width: 58.8556%;"><ul><li>150 minutes depending on routine</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Weight</td><td style="width: 58.8556%;"><ul><li>Small: 11.3lb (5.1kg)</li><li>Regular: 12.4lb (5.5kg)</li><li>Large: 12.8lb (5.8kg)&#xA0;</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Size</td><td style="width: 58.8556%;"><ul><li>Available in multiple sizes, see sizing chart for best fit</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;"><div style="text-align: left;">Dimensions</div></td><td style="width: 58.8556%;"><ul><li>See size chart</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Material</td><td style="width: 58.8556%;"><ul><li>Garment (Boot): Nylon Coated with TPU: 87.5%; Nylon Coated with PU: 10%; Pure TPU: 2.5%</li><li>Housing: PC+ABS</li><li>Garment (Sleeve): Nylon, TPU, PET, PVC</li><li>Pump: PBC+ABS, TPU, PC, TPE, POM, Lithium Ion (Battery), Metals</li></ul></td></tr></tbody></table><h2 id><br></h2><h2 id="user-manual">User Manual</h2><p><a href="https://cdn.shopify.com/s/files/1/0671/4097/6867/files/JetBoots-PRO-Plus-User-Manual-US.pdf?v=1739407783" class="fr-strong">JetBoots PRO Plus User Manual</a></p>

JetBoots PRO Plus

Shop JetBoots Prime. Travel friendly wireless compression boots for leg recovery anywhere. DO NOT use the device while standing or walking. If using a charger from a third party, ensure that it is from a certified manufacturer and has not suffered an

<p id="isPasted">Shop <a href="https://www.therabody.eu/en-eu/products/jetboots-prime-regular" rel="noopener noreferrer" target="_blank" class="fr-strong">JetBoots Prime</a></p><p>Travel friendly wireless compression boots for leg recovery anywhere&#xA0;</p><h2 id="key-product-features">Key Product Features</h2><ul><li style="font-size: 16px;">Effortless portability, uncompromised performance</li><li style="font-size: 16px;">Fully wireless &#x2014; no external pumps or hoses to connect to</li><li><span style="font-size: 16px;">Personalize your leg recovery</span>&#xA0;</li></ul><h2 id="whats-included-in-box">What&apos;s included in box?</h2><ul><li style="font-size: 16px;">JetBoots Prime device (2 connected compression boots)</li><li style="font-size: 16px;">Drawstring backpack</li><li style="font-size: 16px;">USB-C charging cable (270 cm)</li><li style="font-size: 16px;">AC adapter not included</li></ul><h2 id="using-your-device">Using Your Device</h2><h3 id="putting-on-your-device"><span style="font-size: 16px;">Putting On Your Device</span></h3><ul><li style="font-size: 16px;">It is recommended that you wear shorts or thin pants while using the device. Reach a comfortable position, either sitting upright or lying down with your legs straight and feet in line with your waist.&#xA0;</li><li style="font-size: 16px;">Unzip the compression boots completely and place each leg and foot inside each boot. Your legs should be in the center of each boot with your feet as close to the bottom as possible.&#xA0;</li><li style="font-size: 16px;">Keep your legs straight and flat to prevent kinks and folds. Only hold the boots&#x2019; edges when handling them. Avoid holding the device by the control panel. Zip both boots up.</li></ul><p>DO NOT use the device while standing or walking.&#xA0;</p><h3 id="begin-your-treatment"><span style="font-size: 16px;">Begin Your Treatment</span></h3><ul><li style="font-size: 16px;">To power on your device, press and hold the power button on the control panel. The LED indicators on the control panel will light up when the boots are on.&#xA0;</li><li style="font-size: 16px;">Press the pressure button to toggle through four pressure intensity options: 25 mmHg, 50 mmHg, 75 mmHg, 100 mmHg. The pressure setting used in your last treatment will become the default setting for your next treatment. You can also add or subtract pressure during your treatment if desired.&#xA0;</li><li style="font-size: 16px;">Press the time button to toggle through four time options: 20 minutes, 40 minutes, 60 minutes, or continuous. The time setting used in your last treatment will become the default setting for your next treatment&#xA0;</li><li style="font-size: 16px;">Begin your treatment by pressing the start button. Press the pause button at any point during your treatment to pause and deflate the boots. Press the start button again to resume the treatment.&#xA0;</li><li style="font-size: 16px;">Press and hold the power button on the control panel to turn off the device. The device will automatically shut off after 10 minutes of inactivity, including completed or paused treatments. Unzip the compression boots fully and store.&#xA0;</li><li style="font-size: 16px;">When not in use or during transport, lock the device to prevent turning it on accidentally. Turn off the device to activate the lock function. Quickly press the power button three times to initiate the lock function. Each LED light will flash sequentially to indicate that the device is locked. Quickly press the button three times again to unlock. Each LED light will flash sequentially (in the opposite direction) to indicate that the device is unlocked.&#xA0;</li></ul><h2 id="charging-and-led-indicator-guide">Charging and LED Indicator Guide</h2><ul><li style="font-size: 16px;">The device is USB-C enabled and comes with a 6.5 feet (2-meter) USB-C charging cable. The device can charge while the device is powered on or off.&#xA0;</li><li style="font-size: 16px;">Connect one end of the charging cable to the USB-C charging port on the device. It is located on the side of the control panel. Plug the other side into a 20 W USB-C power adapter for optimal performance. Using a power adapter with less capacity may not allow you to use the device while charging.&#xA0;</li><li style="font-size: 16px;">When the device is on, the LED indicators will show the battery status when the device is on or charging. Turn on the device to check the battery status.&#xA0;<ul><li style="font-size: 16px;">1 LED: Low battery</li><li style="font-size: 16px;">2 LEDs: Medium battery&#xA0;</li><li style="font-size: 16px;">3 LEDs: High battery</li></ul></li><li style="font-size: 16px;">The battery life of the device is approximately 180 minutes.</li></ul><p>If using a charger from a third party, ensure that it is from a certified manufacturer and has not suffered any structural damage.&#xA0;</p><h2 id="care-and-cleaning">Care and Cleaning</h2><p>This product is NOT waterproof. Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with corrosive solutions, which can damage the device&#x2019;s appearance and function.&#xA0;</p><p>The JetBoots Prime compression boots have non-porous medical grade material that helps prevent bacteria buildup and provides a resistant surface. The internal overlapping chambers provide a smooth surface to clean, meaning no chamber flaps where bacteria and odors can build up.&#xA0;</p><ul><li style="font-size: 16px;">Unzip the boots completely and lay them on a flat surface.&#xA0;</li><li style="font-size: 16px;">Use a 70% isopropyl alcohol (IPA) cleaning solution to gently clean the inside of the boots. Never use oil-based cleaning products.&#xA0;</li><li style="font-size: 16px;">Wipe down the device&#x2019;s exterior using a soft cloth that is free of debris to reduce surface contaminants.&#xA0;</li><li style="font-size: 16px;">Ensure there is no remaining debris after fully cleaning the device.&#xA0;</li><li style="font-size: 16px;">Once you have fully cleaned the device, fully pat dry the surface and hang to dry completely before continuing use.&#xA0;</li></ul><h2 id="specifications">Specifications</h2><table style="width: 100%;"><tbody><tr><td style="width: 41.0883%; text-align: left;">Battery Life</td><td style="width: 58.8556%;"><ul><li>180 minutes</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Weight</td><td style="width: 58.8556%;"><ul><li>Small: 5.5lb (2.51kg)</li><li>Regular: 6lb (2.73kg)</li><li>Large: 6.3lb (2.86kg)&#xA0;</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Size</td><td style="width: 58.8556%;"><ul><li>Available in multiple sizes, see sizing chart for best fit</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;"><div style="text-align: left;">Dimensions</div></td><td style="width: 58.8556%;"><ul><li>See size chart</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Material</td><td style="width: 58.8556%;"><ul><li>Garment (Boot): 100% Nylon Fabric PU coated</li><li>Housing: PC+ABS</li><li>Garment (Sleeve): Nylon, TPU, PET, PVC</li><li>Pump: PBC+ABS, TPU, PC, TPE, POM, Lithium Ion (Battery), Metals</li></ul></td></tr></tbody></table><h2 id><br></h2><h2 id="user-manual">User Manual</h2><p><a href="https://cdn.shopify.com/s/files/1/0671/4097/6867/files/JetBoots-Prime-User-Manual.pdf?v=1739407801" class="fr-strong">JetBoots Prime User Manual</a></p>

JetBoots Prime

Shop JetBoots. Fully wireless compression boots. DO NOT use the device while standing or walking. This product is NOT waterproof. Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with c

<p id="isPasted">Shop <a href="https://www.therabody.eu/en-eu/products/recoveryair-jetboots-medium" class="fr-strong">JetBoots</a></p><p>Fully wireless compression boots&#xA0;</p><h2 id="key-product-features">Key Product Features</h2><ul><li style="font-size: 16px;">Fully wireless with integrated internal pumps</li><li style="font-size: 16px;">Integrated, one-touch control panel</li><li style="font-size: 16px;">Proprietary TruGrade Technology&#x2122; for safest, precise application of pressure</li><li style="font-size: 16px;">Proprietary FastFlush Technology&#x2122; for full inflation and deflation in 60 secs</li><li style="font-size: 16px;">4 time intervals (20 min, 40 min, 60 min, and continuous)</li><li style="font-size: 16px;">4 pressure settings (25, 50, 75, 100 mmHg)</li><li style="font-size: 16px;">240-minute battery life</li><li style="font-size: 16px;">Easy-to-clean, hygienic design</li></ul><h2 id="whats-included-in-box">What&apos;s included in box?</h2><ul><li style="font-size: 16px;">2 compression boots with integrated pumps</li><li style="font-size: 16px;">36W charger - jack port</li><li style="font-size: 16px;">Splitter charging cord</li><li style="font-size: 16px;">Boots pouch</li></ul><h2 id="using-your-device">Using Your Device</h2><h3 id="putting-on-your-device"><span style="font-size: 16px;">Putting On Your Device</span></h3><ul><li style="font-size: 16px;">It is recommended that you wear shorts or thin pants while using the device. Reach a comfortable position, either sitting upright or lying down with your legs straight and feet in line with your waist.&#xA0;</li><li style="font-size: 16px;">Unzip the compression boots completely and place each leg and foot inside each boot. Your legs should be in the center of each boot with your feet as close to the bottom as possible.&#xA0;</li><li style="font-size: 16px;">Keep your legs straight and flat to prevent kinks and folds. Only hold the boots&#x2019; edges when handling them. Avoid holding the device by the control panel. Zip both boots up.</li></ul><p>DO NOT use the device while standing or walking.&#xA0;</p><h3 id="begin-your-treatment"><span style="font-size: 16px;">Begin Your Treatment</span></h3><ul><li style="font-size: 16px;">After turning on and pairing your RecoveryAir JetBoots, you are ready to choose your program settings.&#xA0;</li><li style="font-size: 16px;">Access two preset program options when connected to the Therabody app: Recover and Warm-up.&#xA0;</li><li style="font-size: 16px;">Once you have chosen your desired program, use the Pressure button to adjust the pressure setting.&#xA0;</li><li style="font-size: 16px;">Then, toggle through the time options using the Time button, to set your desired treatment time (20min, 40min, 60min, or continuous).&#xA0;</li><li style="font-size: 16px;">Once you have selected the treatment options that are right for you, press start, relax, and you&#x2019;ll be on your way to recovery in no time.&#xA0;</li></ul><h2 id="charging-and-led-indicator-guide">Charging and LED Indicator Guide</h2><ul><li style="font-size: 16px;">You can use your JetBoots while they are charging. Also, you can charge one of the boots at the time directly with the power adapter.</li><li style="font-size: 16px;">After turning off the integrated pump, locate the power charging port found at the front right side of the foot of the boot.</li><li style="font-size: 16px;">Connect one side of the splitter to the charging port.&#xA0;</li><li style="font-size: 16px;">Do the same for the second boot.&#xA0;</li><li style="font-size: 16px;">Connect the other end (female end) of the splitter to the power adapter and connect the other side to a wall power outlet.</li><li style="font-size: 16px;">Charging is complete when all 3 LED lights of the LED battery indicator are lit.&#xA0;</li></ul><h2 id="care-and-cleaning">Care and Cleaning</h2><p>This product is NOT waterproof. Do not submerge the device in water or clean it under running water. Do not allow the device to come into contact with corrosive solutions, which can damage the device&#x2019;s appearance and function.&#xA0;</p><p>It&#x2019;s important to take proper care of your RecoveryAir JetBoots compression boots because the longer they last, the longer you will feel the benefits. Each boot has non-porous medical grade material that helps fight bacteria and provide a resistant surface. Our internal overlapping chambers provide a smooth surface to clean, this means no wiping under chamber flaps where bacteria can build up. This also means, no smells.&#xA0;</p><ul><li style="font-size: 16px;">Unzip the boots completely and lay them on a flat surface.</li><li style="font-size: 16px;">&#xA0;Take a disinfectant wipe or spray, and gently clean the inside of the boots. Avoid any oil based cleaning product.&#xA0;</li><li style="font-size: 16px;">Once you have cleaned your garment, make sure to fully dry the surface by hanging them up or wiping them down.&#xA0;</li><li style="font-size: 16px;">We also recommend you wipe down the exterior of the pump to reduce surface contaminants. Avoid using sprays or soaking wet wipes on the back of the pump due to the air vents. Clean with caution.&#xA0;</li></ul><h2 id="specifications">Specifications</h2><table style="width: 100%;"><tbody><tr><td style="width: 41.0883%; text-align: left;">Battery Life</td><td style="width: 58.8556%;"><ul><li>240 minutes depending on routine</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Weight</td><td style="width: 58.8556%;"><ul><li>Small: 4.12lb (1.86kg)</li><li>Medium: 4.40lb (1.99kg)</li><li>Large: 4.48lb (2.03kg)&#xA0;</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Size</td><td style="width: 58.8556%;"><ul><li>Available in multiple sizes, see sizing chart for best fit</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;"><div style="text-align: left;">Dimensions</div></td><td style="width: 58.8556%;"><ul><li>See size chart</li></ul></td></tr><tr><td style="width: 41.0883%; text-align: left;">Material</td><td style="width: 58.8556%;"><ul><li>Garment (Boot): 100% Nylon Fabric PU coated</li><li>Housing: PC+ABS</li><li>Garment (Sleeve): Nylon, TPU, PET, PVC</li><li>Pump: PBC+ABS, TPU, PC, TPE, POM, Lithium Ion (Battery), Metals</li></ul></td></tr></tbody></table><h2 id><br></h2><h2 id="user-manual">User Manual</h2><p><a href="https://cdn.shopify.com/s/files/1/0671/4097/6867/files/RecoveryAir-JetBoots-User-Manual.pdf?v=1739407780" class="fr-strong">Recovery Air JetBoots User Manual</a></p>

JetBoots

Support Hours: Monday - Friday, 6AM-6PM PST

Need help? We’re here for you! For inquiries, please use our Contact Us Form.

We aim to respond within 24–48 hours during business hours. Thank you for your patience!